Total Pageviews

Sunday, 10 April 2011

1st Holiday Report

This is a new method and results table that includes two extra steps for reliability (in the method) and 2 more trials and an average column (in the results table).






Method:
  1. Measure 600ml of water and pour it into the saucepan.
  2. Break off 100g of chocolate from each of the different chocolates and place each of  them into the three bowls.
  3. Light the match and hold it to the stove while turning on the gas. Safety: Do not hold onto the burning match for too long. Blow it out before it burns you.
  4. Adjust the flame to the highest possible one and remember to keep the flame constant - always use the same one.
  5. Place the thermometer into the saucepan, then place the saucepan onto the flame.
  6. Wait for the water to come to a boil, when the thermometer is 100 degrees or when the water is bubbling. 
  7. Place ONE of the bowls - make sure you know which one is which - into the boiling water. Safety: Be careful when placing the bowl into the water that you do do not burn yourself.
  8. Time how long the chocolate takes to melt.
  9. Record the results down in a table.
  10. Take the bowl of chocolate out of the saucepan.
  11. Repeat steps 6-9 for the other two chocolates.
  12. Repeat this experiment two more times for reliability.
  13.  Calculate the averages for the chocolates and record the results in the table.
Results:







Chocolate 
Amount of Cocoa Solids
Trial #1
Trial #2
Trial #3
Trial Averages
Cadbury Old Gold
70%
7 minutes 30 seconds
7 minutes 48 seconds
7 minutes 18 seconds
7 mins 32 sec
Club Original Dark Chocolate
45%
6 minutes 53 seconds
6 minutes 35 seconds
6 minutes 47 seconds
6 mins 45 sec
Cadbury Milk Chocolate
26%
6 minutes 23 seconds
6 minutes 10  seconds
6 minutes 40 seconds
6 mins 24 sec

In the previous results table,  I made a mistake with the times. The times for the Cadbury Milk Chocolate (6 minutes 53 seconds) actually belonged to the Club Original. In the above table, I have fixed this error. 

Thursday, 7 April 2011

DOES THE AMOUNT OF COCOA SOLIDS IN CHOCOLATE EFFECT ITS MELTING TIME?

Here is the aim, hypothesis, equipment and all the variables of my experiment.

DOES THE AMOUNT OF COCOA SOLIDS IN CHOCOLATE EFFECT ITS MELTING TIME?
Aim: 
To investigate if the amount of cocoa solids in chocolate effect its melting time.
Hypothesis:
That the melting time of the chocolate will increase with increasing amounts of cocoa solids.
Equipment:
  • 3 different types of chocolate that have different cocoa solid contents - in this case, I am using Cadbury Old Gold (70%), Club Original Dark Chocolate (45%) and Cadbury Dairy Milk (26%)
  • A small-medium sized saucepan
  • Three identical bowls/cups that will fit into the saucepan
  • Water
  • A thermometer
  • A stove and matches
  • Measuring cup
  • Stop watch
Variables:
The variable I will change (independent variable) is: the amount of cocoa solids in the chocolate.
The variable I will measure (dependent variable) is: the melting time of the chocolate.
The variables I will keep the same (controlled variable) are: the size of the flame, the temperature of the water, the amount of water, the type of bowl, the amount of chocolate melted.

Tuesday, 5 April 2011

Draft Method

This is a copy of my draft method. I will post the finalised one after I have proof read it and discussed the method with Mr Ryan.
Method:
  1. Measure 600ml of water and pour it into the saucepan.
  2. Break off 100g of chocolate from each of the different chocolates and place each of  them into the three bowls.
  3. Light the match and hold it to the stove while turning on the gas. Safety: Do not hold onto the burning match for too long. Blow it out before it burns you.
  4. Adjust the flame to the highest possible one and remember to keep the flame constant - always use the same one.
  5. Place the thermometer into the saucepan, then place the saucepan onto the flame.
  6. Wait for the water to come to a boil, when the thermometer is 100 degrees or when the water is bubbling. 
  7. Place ONE of the bowls - make sure you know which one is which - into the boiling water. Safety: Be careful when placing the bowl into the water that you do do not burn yourself.
  8. Time how long the chocolate takes to melt.
  9. Record the results down in a table.
  10. Take the bowl of chocolate out of the saucepan.
  11. Repeat steps 6-9 for the other two chocolates.

Sunday, 3 April 2011

Week 10 Progress Report

I have just tested my experiment today, and here are the results:




Chocolate 
Amount of Cocoa Solids
Melting Time
Cadbury Old Gold
70%
7 minutes 30 seconds
Club Original Dark Chocolate
45%
6 minutes 23 seconds
Cadbury Milk Chocolate
26%
6 minutes 53 seconds
 
I will discuss the results with My Ryan and then post another blog with my whole experiment, including the aim, hypothesis, the variables, and a draft conclusion.